Experimental liquid–liquid equilibria of 1-methylimidazole with hydrocarbons and ethers

The liquid–liquid equilibria (LLE) of eight binary systems containing 1-methylimidazole and n-alkanes (n-pentane, n-hexane), cyclohydrocarbons (cyclopentane, cyclohexane), aromatic hydrocarbons (hexylbenzene) or ethers (di-n-propyl ether, di-n-butyl ether, di-n-pentyl ether) have been measured from 270 K to the boiling temperature of the solvent using a “cloud point” method. Experimental solubility results are compared with values calculated by means of the NRTL equation utilizing parameters derived from LLE results.Solubility of 1-methylimidazole in many other organic solvents (aromatic hydrocarbons, branch chain ethers and ketones) has been measured at temperatures higher than 293 K and no miscibility gap was observed. The interaction of 1-methylimidazole with different solvents is discussed.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

Chiral Ti(IV) complexes of hexadentate Schiff bases as precatalysts for the asymmetric addition of TMSCN to aldehydes and the ring opening of cyclohexene oxide

Chiral dinuclear titanium(IV) complexes (generated in situ from hexadentate Schiff bases and titanium tetra-isopropoxide) have been found to be more effective catalysts for the asymmetric addition of trimethylsilyl cyanide to aldehydes and the ring opening of cyclohexene oxide than their mononuclear analogues. The best results were obtained for benzaldehyde (86% enantiomeric excess) and cyclohexene oxide (89% enantiomeric excess).     

Copper-exchanged LTA zeolite membranes with enhanced water flux for ethanol dehydration

Phase-pure and well-intergrown Cu-LTA membranes are developed through copper ions exchange of sodium ions in Na-LTA framework. For pervaporation of 90.0 wt% ethanol/10.0 wt% water mixtures, the Cu-LTA membrane shows much higher water flux than Na-LTA membranes due to the enhancement of the pore size after ions exchange.     

Emission spectroscopic monitoring of particle composition,size and transport in laser ablation inductively coupled plasma spectrometry

The spectroscopic line emissions of copper and zinc from atomized particles generated by orthogonal pre-pulse laser ablation of brass and transported from the ablation cell through tubes into an ICP have been simultaneously measured end-on with fast photomultipliers. It was shown that simultaneous line monitoring of major elements provides not only information on the aerosol transport in laser ablation ICP-spectrometry, but also on the ratios of small to single larger particles and their respective elemental compositions and, therefore, on possible elemental fractionation problems. Furthermore, the spectroscopic information can be easily exploited for proper adjustment of the laser fluence in order to minimize the production of large particles, to improve the transport efficiency and to reduce the noise of analytical signals in laser ablation ICP-spectrometry. The present particular experiment on orthogonal pre-pulse laser ablation of brass confirms the recent finding that such kind of double-pulse arrangement produces predominantly ultra-fine particles. Individual brass particles with diameters ≳ 250 nm could be analyzed. They showed large Zn depletions as expected. Finally, strong accumulations of aerosol particles were found in the ablation cell used even at low laser pulse frequencies.     

烯烃氢氨甲基化反应研究进展

烯烃的氢氨甲基化反应是合成各种胺及其衍生物的有效途径. 以催化体系及应用范围的发展为线索综述了该反应的研究进展.     

硝基苯在离子液体BMimBF4-H2O中的电还原

采用循环伏安法和恒电位电解法研究了离子液体BMimBF4-H2O 中硝基苯在微铂电极上的电还原特性. 实验表明, 在BMimBF4中, 随着硝基苯和水的浓度变化, 循环伏安曲线的峰电位和峰电流呈现复杂的变化规律; 硝基苯在铂电极上的电还原反应为双分子8 电子3 步骤电化学过程, 第一步反应为准可逆单分子单电子转移步骤, 产生阴离子自由基, 第二步为2 电子转移步骤, 并伴有随后的双分子不可逆自由基偶合化学反应, 主要产物为氧化偶氮苯, 第三步是2 电子转移产生偶氮苯的过程.     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

Molar volumes and viscosities of LiClO4 and LiBr in propylene carbonate + 1,2-dimethoxyethane mixed solvents at 298.15 K

The standard partial molar volumes, viscosity B-coefficients and activation free energies of lithium salts (LiClO₄ and LiBr) in propylene carbonate (PC) with 1,2-dimethoxyethane (DME) mixed solvents have been determined as a function of the mole fraction of DME at 298.15 K from precise density and viscosity measurements. The values studied are all positive and decrease monotonously with addition of DME in the PC, which indicates that nature of the solvents plays an important role. The effects are discussed in terms of preferential solvation and packing effect in the solvation shell and electrostriction. The differences between ClO₄⁻ and Br⁻ have also been discussed.     

Interaction of –CClx (x=1–3) with Ru2 and RuSn dimers: a density functional study

Density functional calculation were performed on the Ru₂ and RuSn metal dimers and the species formed from their interaction with –CCl_x (x=1–3) fragments. The importance of these fragments in the hydrodechlorination of carbon tetrachloride has been motivated this study aiming to contribute to understand the effect of the tin in the performance of the noble metals based catalysts. We have observed that the carbon tetrachloride does not form a precursor with the metal dimers. The CCl₄ readily dissociates forming adsorbed chlorine and –CCl₃ complexes. The chlorine atoms prefer to adsorb on the bridge sites and the RuSn–Cl binding energy is about 5 kcal mol⁻¹ larger than the Ru₂–Cl binding energy. The Ru₂–CCl_x (x=1–3) binding energies are larger than the respective RuSn–CCl_x (x=1–3) binding energies. However, the reaction energy of the dechlorination of CCl₄ leading to adsorbed –CCl_x (x=1–3) and chlorine is thermodynamically more favorable for RuSn than the Ru₂. The differences between Ru₂ and RuSn systems have been discussed based on the different interaction mechanism due to the presence of the tin center and its affinity for the chlorine atoms.